The product supports A3/Ledger print, fax, copy and scan functions.

The default product setting is for A4 use, therefore you need to change the settings to use A3/Ledger paper.

Follow the instructions below to use the machine with A4 paper in Tray1, and A3 paper in Tray2.

Load paper and change the paper setting.

1. Put A4 paper in Tray1.
2. Put A3 paper in Tray2.
3. Press Menu, and then choose General Setup => Tray Setting => Tray#2 => (Paper Size)A3
4. Press OK. (For touchscreen models, skip this step.)
5. Press Stop/Exit.

Receive A3 sized faxes : (not applicable for DCP Users)

1. Press Menu and then choose General Setup => Tray Setting => Tray Use:Fax => Auto Select*
   (*If you want to receive every fax to A3 paper, select Tray#2.)
2. Press OK. (For touchscreen models, skip this step.)
3. Press Stop/Exit.

Send A3 sized faxes: (not applicable for DCP Users)

-Faxing from the ADF (Auto Document Feeder)

Place the A3 document face up in the ADF and send the fax as normal.

-Faxing from the scanner glass

1. Load your document face down on the scanner glass.
2. Press Fax and select A3 for Glass ScanSize.
3. Press OK. (For touchscreen models, skip this step.)
4. Press Stop/Exit. 

Print an A3 document

For Windows® Users:

1. In your application menu, select File, Print... and select Properties.
   
    

   
   
    
2. Select A3 for Paper Size.
   
   
   
   
   
    
3. Select Auto Select for Paper Source.
   
    
4. Click OK.